Permanent Surface Mounted Wash Pads
This water tight, permanently-fixed wash pad is a sealed bund made from fibreglass panels providing a stable liquid containment environment specifically for tough applications. The fibreglass wash pad is corrosion, fire and impact resistant, none slip and maintenance free and can be installed within hours of delivery, replacing a traditional but costly concrete wash pad.
All water is captured via a 100mm drain and then delivered to foul or pumped to a water reclamation system. The wash pad can be manufactured to meet your specifications in terms of dimensions, colour and design and the the wash pad is supplied with a drain to one end of the pad as standard or can be supplied as a complete water tight retainer.
- Easy to intall and economical
- Holds up to 60 tonnes
- Corrosion, fire and impact resistant, none slip and maintenance free
- Manufactured in various colours on a bespoke basis
- Custom manufacture ensures flexibility of applications
Using the Permanent Surface Mounted Wash Pad
After delivery, put into place the rigid permanent mat and use the fast-fix bolts to adhere the wash pad to the floor. Enviromec provide delivery with their own transport.
If you intend to use a drain and pump the floor will require a 100mm channel in the surface. This will cause little disturbance and once complete you'll have a fully fitted wash pad at a fraction of the cost and time.
Enviromec can source and design to any practical size using various colours.
The 3 metre wide floor is generally suitable for commercial vehicles and cars however HGVs are more suitable to a 4.5 metre width floor.
The floor will not be damaged by the weight of the vehicle it is designed for. This product has been well tested over the years and a demonstrator is available at our premises for your inspection.
Water Tightness Quality Control
Both easy to use and innovative the mobile wash pad is not just 'simply made'... Every mobile floor has to be fully tested and we give a guarantee of water tightness. All the welded joints and connections are inspected and vacuum tested during a rigourous quality procedure. Each mobile floor can be identified by its unique registration number printed on the side. This ensures that all products and materials used during manufacture are identifiable.